Mazda IDS 99 test OK on VXDIAG VCX NANO

Obdexpress technicians today has successfully tested Mazda IDS 99 with VXDIAG VCX NANO Mazda.

(VCM II clone will be tested later and please wait for the new result)

Free download
MAZDA IDS 99.02.rar
IDS-99.01_Full.exe
Mazda IDS 99.00.exe

Operating system:
Windows XP
Win 7

Language:
English/ Japanese/ Portuguese/ Romanian/ Korean/ Dutch/ Polish/ Turkish/ Spanish/ French/ Italian/ Croatian/ Danish/ German/ Swedish/ Finnish/ Slovenian/ Czech/ Russian/ Greek/ Chinese

IDS 99 Function list:
1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
2. Live Data-stream with Recording & Playback Functions for Main ECUs
3. Read & Clear Diagnostic Trouble Codes (DTCs)
4. Set, Adjust or Remove Speed Governors
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Program New Keys
11. DPF Regeneration
12. Brake Bleeding
13. Injector Coding

For Ford IDS 99, go to http://obd2-diag.blogspot.com/2016/03/ford-mazda-ids-v9903-free-download.html

How to install MAZDA IDS V98 on Win7/ XP

This is the instruction on installation of MAZDA IDS V98 for VXDIAG VCX NANO MAZDA.   Free download  Driver for VXDIAG VCX NANO/ VCM 2  Mazda IDS V98   Compatible device: VXDIAG VCX NANO for Mazda (both wifi or non-wifi version are ok)   OS requirement: WINDOWS XP/ WIN 7   How to install Mazda IDS 98 Video guide: https://mega.nz/#!J1FQRaLT!ycqVpnr6TUepWAs2ingLqfUxrQd_F37_6-X35oHA2K0   Step-by-step instruction: Step 1 install Mazda IDS  Open Mazda IDS 98 disk. Open .exe file- Mazda_IDS_98.00, to begin installation. Select language. Here: English. Then click Next. Preparing IDS setup... Click Yes to proceed. Click Next to install Mazda ids. Accept the agreement to go on. Click Next. Click Install. Installing IDS.... (10 minutes needed) Click Reboot to restart your computer.   Step 2 install Mazda C93 Back to Mazda IDS 98 disk. Open the folder C_CD>>setup.exe Click Next to install C93. Click Next. Click Install. Installing Mazda C93.... (10 minutes needed) Click Finish when successfully install Mazda C93.   Step 3 install VX Manager Back to Mazda IDS 98 disk. Open VX Manager 1.0.6.1218. Click Next to install VX Manager. Accept the agreement and click Next. Click Next. Click Next. Select Ford, and click Next. Software automatically run... Click Close. Click Finish. Check: Open VX Manager on Desktop, and then close it.   Step 4 Mazda IDS 98 test on Mazda 6 Open Mazda IDS on Desktop. Dealer type: non-dealer. Country: CHILE. Then click the tick button. then please follow the screen.

Ford VCM2 IDS learn PRV SCV for Transit MK7 steps

What the steps to learn a PRV (Pressure Reducing Valve) and SCV (Speed Compensated Volume) on a Ford Transit MK7 FWD van using Ford VCM2 IDS diagnostic & programming system when normally replaced? Check out the instruction below.

Tools needed:
A new PRV and washer
A new SCV and seals
A basic socket set and Allen keys
Ford VMCII diagnostic tool with IDS software

Step 1: Change a PRV and SCV
Check the google docs file below. There’s the step-by-step guide on changing a PRV and SCV on MK7.
If you have not problem on replacing these, then skip to Step 2.
https://docs.google.com/document/d/1nx54sy8FPUf3US0x4ZwOOtE0kve65mtecXVSXu_4TGA/edit?usp=sharing

Step 2: PRV SCV pump pilot learn with IDS
After replace the PRV and SCV, start programming.
Well loaded VCM2 IDS v86/v91/v96 software on a delicate Win XP laptop.
Connect VCMII system with vehicle via OBD socket.

Now crank the van over until it starts, it might take a few turns to get going, mine only took about 10-15 seconds and fired up. Let it stabilize and the switch off.

Now it will need checked for any leaks first, if it's ok then it's time to get the diagnostics our and perform a pump learn first and then an injector learn.

Then reset the learned values and counters.

Select Programming icon in IDS
Select Powertrain control unit
Select Service Function->PCM

Select Fuel Injection Pump Learn and the follow IDS prompts

VCM II IDS will guide you through the process of the learns.
Wait the procedure is done. Clear restored DTCs and exit the IDS software.