Here are some tips of “reading error” for you when reading EDC17C41 DDE8 520d F10 ecu with Ktag clone, offered by experienced users.
TRY OWN YOUR OWN RISKS!!
Tip 1 - replace oscilator near the nxp processor on ktag board
Tip 2 - need boot and 2 rainbow cable yellow and orange and you have placed the yellow and orange on the wrong spot
1.GREEN-CAN L
2.ORANGE-VKEY
3.YELLOW-K LINE
4.ORANGE-VKEY
5. RED-VECU
6.BLACK-GND
7.BLACK-GND
8.PURPLE-VPP
9.RED-VECU
10.WHITE-CAN H
Tip 3- to rework ktag hardware is necessary with good component, buy too necessary good power supply
Tip 4 - ECU tuning tools for reading BMW F-series EDC17C41 Ktag v6.070 --> YES
Need rework hardware to read EDC17C41 as tips above say KTM100 v7.003--> YES
BMW ecu EDC17C41 is newly added in KTM100 fw: v7.003
Kess V2--> NO!!
Kess v2 can’t read and write this type of ECU (EDC17C41), ECUs on the same car model in different areas are sometimes encrypted in different ways, and therefore the tool cannot always work on the same car model.
NOTE: WE’RE NOT RESPONSIBLE FOR ALL YOU WILL TRY. GOOD LUCK.
Besides, KESS V2 master V4.036 can also cover multi-brand cars and motorcycles. Therefore it is very suitable for ECU tuners who work at workshop/garage.
Kess V2 4.036 is multi-languages available: English, German, Spanish, Italian, Portuguese and French.
Kess V2 4.036 Specific New Features as Follows:
1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC
7. Several options of reading/writing speed
8. Option to write full file/section of the map
9. Full integration with ECM Titanium
The procedure of installing Kess V2 4.036 truck:
Please note: Software V2.22/V2.08 ( If you run V2.22 version, please disconnect the internect. V2.08 can run under internet connecting.
Operating System
Suggest Windows XP O.S., Other O.S. can be tried
Video demo:
Maybe you would prefer to read in text, details as follows:
1.Open “My Network Places”,click View network connections”, disable the three network connections as follow
2.Open My computer\E:\DVD Ksuite truck, open Ksuite v2.08, click Ksuite icon file, install Ksuite as hint step by step.
3.Open Ksuite on the desktop, right click properties—click “Find Target “on the bottom, open c:\ Ksuite, delete the all file of c:\ Ksuite
Next copy the all file E:\ Ksuite v2.08\ksuite to c:\ Ksuite.
4.Open Ksuite truck(E:), copy file “help’ to c:\ Ksuite.
5.Insert new hardware wizard and install the software step by step as hint.
6.Right click “manage” of My Computer, then pop up “computer management”,click “Device Manager” on the left
next we will find “Universal Serial Bus controllers” on the right bottow, click its front plus, then click USB Device.
7.Open Ksuite on the desktop, click the first icon on the left to see car type, choose the type as follows
Then click two ok , next select CAN/ID, click ok as hint step by step.
8.Save ID as e90 on the desktop
9.Select READING,click ok by step, then pop up “proceed to read?”, click ok. After reading ECU, save as e90 on the desktop. Then “wait analyzing Log in progress...”, click back.
10.We can try to test other car type as the same way before.
Ok, that’s all, thanks for your visiting. I will be glad to help you if you have some problems later.
For any question, please contact us at:
E-mail:sales@obdexpress.co.uk
Skype:obd2express.co.uk
New update!!! Newest KESS V2 master firmware V4.036 SW V2.22 is tested ok to read write ECU data on with most worldwide truck makes and models. This is an extremely amazing news for KESS V2 regular users who mainly have multi-brand trucks to diagnose, also some cars and motocycle to scan.
Truck version KESS V2 master FW V4.036 compare with SE87-CK and SE87-D:
1) Truck version V4.036 read write ECU data on more trucks models compared with firmware V4.024 (Item No. SE87-CK)
2) Truck version V4.036 read write ECU data on not only trucks but also cars and motorcyles, while the car version V4.036 (Item No. SE87-D) hardware fail to cover truck otherwise it will burn the truck (Reading detail in the following part on "installation procedure")
3) Truck version V4.036 only sales for €116.99 and car version V4.036 (Item No. SE87-D) is €165.
Truck version V4.036 KESS V2 master User tips:
1) Disable both local area and wireless network connection
2) OS: Windows XP 32bit (better)
Truck version V4.036 KESS v2 setup procedure + test trucks, motorcycle and cars 1. Firstly install Ksuite V2.08
You may get the error message reading "connection not established" after successfully finishing the driver, click ok and exit the user interface.
Open E:\Ksuite V2.08\Ksuite and meanwhile right click the icon "K-suite" at the desktop, select "Properties", then click "Find Target", select all files and right click to delete these files to the recycle bin.
Go to "E:\Ksuite V2.08\Ksuite", select all files and right click to copy, and go to C:\Ksuite to paste all.
Open E:\ and copy the folder "Help" to paste to C:\Ksuite, close C:\Ksuite.
Connect Kess v2 V4.036 hardware to the computer, and get message "Found New Hardware Wizard" and click next to finish.
Click My Computer-Manage-Device Manager- Universal Serial Bus controlers, you will find USB device. It means KESS V2 V4.036 has been established a good communication with the computer.
2. Open "K-suite" at the desktop, searching software update online...
3. Test to read write ECU data on trucks , cars and motorcycles
1) To check what truck makes KESS V2 V4.036 covers.
KESS V2 V4.036 read write ECU data on most truck makes and models
2.) Use KESS V2 V4.036 to read out ID and ECU for Cars
Click car icon to have a test, for example BMW-3 Series(E90) 323i 250024v...shown as follows. Then click "OK"
Get prompt about what to notice.
Kline or Can to select, e.g Can
Select options: ID, reading, writing, recovery.
a)Read out ID
Click "Ok" to confirm you have done as the prompt.
Finally read out HW, SW and chassis
Then click "Ok" to save at the desktop, name as "e90".
b) Reading
Back to select "READING"
Click "Ok" to confirm you have done as the prompt.
Test another BMW model e.g BMW 3 series 320d 2000 D N47D2000...
You will get waring, notices and recommendation and instruction. As for the pinout most users tend to ask, click "Here" shown as following second pic.
3.) Motorcycle secondly KESS V2 V4.036 read write ECU data on a multi-brand Motorcycles shown as follows. take BMW MOTORRAD for example.
