v2.23 kess v2 fw 7.020 ECU programmer

Tuesday 28 June 2016

Multi-Diag Access J2534 prompt "the update of the communication interface"error

From obdexpress customer response, after the Multi-Diag Access J2534 software installed, when work with his car get a prompt "the update of the communication interface" below, in this page, to not bottom go to, the LED lights flashed not bright..
Solution:
1. To reconnect or for the other car
2. If the LED is not bright, that equipment is broken, need to send back to repair

Note:
1. Pls disconnect the network when install the software.
2. Pls follow the installation video to install the software and drivers.

http://blog.obdexpress.co.uk/ktag-ecu/

Thursday 23 June 2016

2015R3 TCS CDP+ PRO on BMW 3 series e90- NO ISSUES

TCSCDP+ 2015R3 software has been updated and first released at OBDexpress.co.uk. Also, engineers tested OK with TCS CDP pro with 2015.3 software, on BMW 3 series E90.

Obd2express engineers tested with the best Chinese TCSCDP + (Bluetooth version)
Source: http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnostic-bluetooth-a.html



Test 2015R3 software on BMW e90.
Read fault codes via USB or Bluetooth connection
Via USB/BT (com port)





Via Bluetooth (direct)



CDP pro read BMW E90 faults - SUCCESS!

Friday 17 June 2016

XPROG-M, Carprog v8.21, R270 - read & erase BMW EEPROM M35080

I wanna share some tips to read and erase BMW EEPROM M35080, with Xprog m v5.3, Carprog v8.21/ v9.31, R270+ BDM Programmer v1.2.. all mentioned and suggested in my post in a forum. Ideas are form obd2express customer service. Hope it helps you also.

Details of Xprog m v5.3, Carprog v8.21/ v9.31, R270+ BDM Programmer v1.2..

1- Xprog-M v5.3
Correct connection instruction:

Above is the M35080 pin order and the Xprog-m 16 pin connector pin labels so that the correct 7 pins can be sequenced between the M35080 eeprom and the Xprog-m special programming board for the M35080 Eeprom
Xprog-m v5.3 read EEPROM M35080 success.

2- Carprog v8.21/ v9.31
Manage to read and clear EEPROM M35080
- to read and clear OFFLINE with Carprog v9.31 program
- to read and clear ONLINE in Carprog v8.21 interface
Main steps to read eeprom via carprog:
Open carprog program
Select EEPROM-> 93C 24C 95x v2.6
Click on the tool icon, then select M35-> 35080-> read/ verify, then click OK
Initializing... Reading... Verifying...
Verify ok

Carprog read EEPROM M35080 success.

3- R270 Pro V1.20 CAS4 BDM Programmer
Correct connection...
Open R270 in circuit programmer
Select correct MCU “D80 D0WQ/”
then “M35080/160D” button
then select IC Type “D80 D0WQ/” and DAS Odometer Type “Type 1”
then “Read”
decoding...



R270 pro+ read EEPROM M35080 success.

Sunday 12 June 2016

Free shipping 2015.R3 TCS CDP+ PRO Multi-language Diagnostic Tool

2015.R3 TCS CDP+ PRO Diagnostic Tool Support Bluetooth,Support Multi-language,It works on both old and new vehicles. Obdexpress.co.uk offer you worldwide free shipping.

New Software Version: 2015.R3

TCS CDP+ PRO Support multi-language: English , Cesky, Dansk, Deutsch, Espanol, Francais, Greek, Hollands, Hungarian, Italiano,Norsk, Polish, Romania,Russian, Srpski, Suomen kieli, Svenska, Turkish and so on.

Good quality 2015.3 TCS CDP+ PRO Diagnostic Tool is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles.

With CARS, you are able to perform brand specific diagnostics for cars and light vans from 1988 onwards. A total of 47 different brands. With TRUCKS software package, you are able to perform brand specific diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards.

A total of 37 different brands. The diagnostic program GENERIC is designed for the legislation based diagnostics, specially targeted for emission related fault codes. GENERIC is included in CARS and TRUCKS packages.

Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog in, 5volt out).

2015.R3 TCS CDP+ PRO PCB display:




2015.R3 TCS CDP+ PRO without bluetooth:
http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnostic-without-bluetooth.html

2015.R3 TCS CDP+ PRO with bluetooth A:
http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnostic-bluetooth-a.html

2015.R3 TCS CDP+ PRO with bluetooth B:
http://www.obdexpress.co.uk/wholesale/tcs-cdp-pro-diagnostic-bluetooth-b.html

Wednesday 8 June 2016

OBDSTAR X300M odometer adjustment device Test Results from Customers

Here is customer feedback collections of OBDSTAR X300M Odometer Adjustment at obdexpress.
Feedback on http://www.obdexpress.co.uk/wholesale/obdstar-x300m-odometer-adjust-obdii.html

Customer Feedback:

For mileage correction:
hyundai Accent 2011... by obd in 2 seconds
Mileage
focus 2013 OK
fiesta 2012 OK
grand punto 2010 OK
punto 2007 OK
grand cherokee 2013 OK
astraj 2010 2011 2012 NOT OK
Fiat fiorino obd ok
Audi A4 2007... in 20 seconds by OBD.
2013 jetta mono display ok.
Chevrolet CRUZE 2012, Read security code ok and Mileage ok
Cruze 13 miles ok
Volkswagen Amarok 2014 ok ( chose golf NEC 24C64 white meter 2013-)
Porsche Cayenne 2012 mileage OK
Skoda Octavia 2010 nec+24c32 VDO mileage OK
Skoda Superb 2012 via obd mileage ok
Polo 2004 VDO k Line mileage OK
have made KM visteon dash 95320 vw golf 5 with success, just plug and play

For key programming:
Honda civic 2006 all keys lost OK
Chevrolet Captiva 2012, 2013 ok

Successful Experience in Odometer Function:
1) VAG group vehicles:
Audi A3 is on the list from 2003 - 2006, 2007- up personally I have not tried
Volkswagen Tiguan 2013 TFT color dash nec+24C64 ok
Volkswagen caddy 2014 white meter NEC24C64 via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Volkswagen Caddy 2014 with TFT Color dash via obd
Seat Ibiza 2014 Via obd ok
Volkswagen Polo 2014 with NEC24C64
06 a8 OK
2013 golf with black/white screen - OK (with latest update)
Q5 2013 via obd ok
Tiguan 2012 tft color NEC24C64 ok
Volkswagen Polo 2014 White Meter NEC24C64 using golf menu OK
Passat 2009 mileage nec+24c32 OK
Can support vw micronas

2) Hyundai
Hyundai verna fluidic obd ok
hyundai accent 2012 by obd ok 24c16
Hyundai Creta D70F3525 ok
Hyundai Verna 24c16 ok
hyundai Accent 2011... by obd in 2 seconds

3) Kia
Kia Sportage with 24c16 2012 work perfect
Kia sorrento 24c16 al ok obd
Kia sportage 2013 round dash screen obd success
Kia optima mileage correction : ok
Kia Sportage D70F3423. 2015 successfully done less than 20 seconds.
Kia Sportage 2014 with 24C16 work perfect
kia sportage r 2014 d70f423 mieage tested ok

4) Opel
Opel Isignia 2011 works well via obd
Astra J 2010 ok
Opel Insignia 2009/2011 OK

5) Others
Chevrolet Cruze 2010, 2011, 2012 via obd Ok
Range Rover Evoque 2013 via obd ok
Jeep compas 2014 for obd2 2008+
I20 24c16 ok (Note: if you WANT TO DO KM IN HYUNDAI I20 THEN YOU HAVE TO PUT KM 4 TIME MORE  EX. 1000 KM NEED THEN PUT 4000 KM IN X100.)
2006 Chrysler 300c -> will do dash via obd but won’t do SRI
Hummer H2 2008 via obd ok
2014 Altima Via obd ok
i20 by obd ok ..... so i had to make the x4 solution given on this thread example for 25300km = 25300x4 ; sometimes gives 9999999 some times 564873248 whatever but keep trying 1 or more number more on total.
Rio obd ok
Chevrolet Cruze 2014 via obd take less than 4 seconds
Range Rover Evoque SD4 2013 ok less than 2 seconds
Chevrolet cruze lt 2012 alla key lost ....OK 10 min programing and mileage correction ok
today rang rover sport 2014 , 10 sec after buckup all ok
new update mileage correction for hyundai Sonata 9
Benz yes bmw no
2008- savana asking to enter ecu code
Nissan Leaf Electric Car 2014 Mileage correction done
Dodge durango 2014 .... work perfect
ford ranger 24c16 by obd2 ok
Fiat 500 2010 OK
Grande Punto 2009 OK
Opel Zafira 2012 OK
Audi A3 2008 monocolore OK
Evoque 2012 works OBD
it can make Audi normal a6 before 2009
I20 2015 TESTED.VERY GOOOD.OK OK OK
Astra J 2011 read Security Code ok (via gm cruze)
Golf 6 2012 white color, write 2 sec !!
hyundai Accent 2011... by obd in 2 seconds
hyundai Accent 2011... by obd in 2 seconds
focus 2013 OK
fiesta 2012 OK
grand punto 2010 OK
punto 2007 OK
grand cherokee 2013 OK
astraj 2010 2011 2012 NOT OK
Fiat fiorino obd ok
Audi A4 2007... in 20 seconds by OBD.
2013 jetta mono display ok.
Chevrolet CRUZE 2012, Read security code ok and Mileage ok
Cruze 13 miles ok
Volkswagen Amarok 2014 ok ( chose golf NEC 24C64 white meter 2013-)
Porsche Cayenne 2012 mileage OK
Skoda Octavia 2010 nec+24c32 VDO mileage OK
Skoda Superb 2012 via obd mileage ok
Polo 2004 VDO k Line mileage OK
have made KM visteon dash 95320 vw golf 5 with success, just plug and play

Fail:
Ibiza 2015 failed
Car had 110,581 kms x100 displayed 442,xxx kms
Volkswagen Polo 2012 with Nec+95320 can't do it, security access failed
AUDI a3 2011 not work, advise you can do it with vvdi, vvdi2
2006 chrysler pacifica immo no connection (8th November, 2015 update)
 Hyundai Verna Fludic 2015 pertol but no communication with x 100(20th November, 2015)
98 beetle NOT OK(22nd November, 2015)
Volkswagen Caddy 2015 white meter with NEC24c64 failed (27th November, 2015)
Can't reset Volkswagen DSG also Cruze BCM
Kia soul with 24c16tw .... obd not ok
Hyundai accent 2014 with 24c16tw ......not work, but other accent with red screen tacho light 24c16 work well

Friday 3 June 2016

Is it OK to get a clone GM Tech2? Work as a real Tech 2?

I hope this review can help someone with the same puzzles as me.

Here, i wanna firstshare what i found about the genuine and clone Tech2 with you all...







Left -clone; right -real











Then in a forum, i was introduced to the one:
http://www.obdexpress.co.uk/wholesale/gm-tech2-gm-diagnostic-scanner-obd2express.html
Read info there and talked to the customer service staff... Decided to take a risk.. YES! I ordered it there.




So far, i have used it for a few data. The cheap one still works great. I don’t know how the genuine works but i am satisfied with the clone one.

My friend who has ever used a genuine tech 2, says the clone’s screen is much brighter and buttons feel kind of different- buttons on the original have a distinct "click" feel to them while the clones are mushy

The only thing I'm disappointed by that I didn't get the case. The other forum member stated that the price would be much more if you got the case. I wish I had done some more research because I found several sellers selling the same thing with the case for around the same price. However, I did feel more comfortable buying that from the same source as the other member.

It will work on any GM OBD2, meaning 1996+; now it’s updated to 2013.
Under the 2012 models it lists Chevrolet, Cadillac and Holden
I have used the GM Tech2 to reset IMMO for my OPEL Corsa-C 2005
Plug GM Tech2 cable into OPEL Corsa-C socket;
Boot up GM Tech2 diagnostic tool;

Enter into Main Menu;
Click Diagnostics to select car model and year;
Click Body >> Immobilizer >> Partnumber >> Additional Functions >> Reset Immobilizer, next you need to enter security code.
Step3:
Operate according to the tips, until it appears message reading “Reset Immobilize. Reset completed successfully!” It is Okay.
Sorry the last three photos are taken by my phone with a bad-resolution camera.