Xtruck USB Link 125032 Bluetooth Connection

Xtruck combines the characteristic of previous Xtruck USB link and Nexiq 125032 USB link.  Xtruck USB Link 125032 adds advanced Bluetooth wireless function.

Computer Configuration:
Xtruck 125032 Driver: Microsoft Windows 2000 and XP operating systems
Xtruck Software: Windows xp and windows 7 32-bit and 64-bit and windows CE compliant
(Volvo, Hino, Perkins, Cat, and Nissan software must be installed in XP system. Other software can be used in Win7 32bit system.)

Xtruck USB LINK diesel software list:
- Allison
- Bendix 6.3.8.0
- Detroit Diesel DDDL 7.05
- Detroit Diesel DDCT
- Detroit Diesel Calibration Tool
- Eaton Service Ranger 3.2
- International DLB
- International ICAP, IPTS, NETS, IPC
- International Master Diagnostic
- Meritor and Wabco Diagnostics
- Cummins Insite 7.5
- Hino 2.0.3.
- Caterpillar 2.0.1.0
- Perkins EST 2010B
- V Macks 2.6.12
- V Macks Dealer Pro
- Volvo VCADS 2.35.10
- Toyota Techstream for car
Xtruck software supported language

No cable is needed for vehicle diagnostic using the Xtruck USB Link 125032. The diagnostic base system can access the Xtruck USB link via Bluetooth or USB.

Access via Bluetooth:
After a connection to vehicle, the Xtruck USB link has been set up. The Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the Xtruck USB link. After built connection with Bluetooth, the system will ask for a PIN “NEXIQ” (with all letters capitalized) to confirm Bluetooth communication. You need to specify this port when you install the diagnostic application.

Access via USB:
You can also connect the Xtruck USB link to the application PC by using the supplied USB cable. Windows detects the Xtruck USB link through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the Xtruck USB link is then complete and the device is ready for use by the diagnostic application.

GM Tech2 bleed ABS brake systems procedures

Almost all modern vehicles have ABS system or anti-lock brake system on their cars and trucks. ABS brakes, like any other brakes which need regular maintenance including bleeding. Different vehicle models enjoys similar way of bleeding ABS systems are similar among different vehicles, but GM Tech2 scanner is specially designed for GM vehicle models.

The text below gives an instruction on how to bleed the ABS system with GM Tech 2 scan tool.
Tool:
GM Tech 2 scan tool

Follow the following instructions:
1) Raise your car into a properly support position
2) Disassemble all 4 tires and wheel assemblies
3) Check the brake system for leaks and visual damage. If the situation is damage or have to be get it done and how to use the device to make a possible position. Replace or repair as needed.
4) Check the battery state of charge (you may refer here)
5) Install GM Tech2 scan tool software. (Download related PDF manual on OBD365 webpage)
6) Turn the ignition to ON position with the engine OFF
7) Connect the GM Tech2 scanner into the OBD diagnostic socket
8) Select "Special Functions">> "Automated Bleed"
9) Bleed the base brake system.
10) Follow the Tech2 scanner screen instructions until the desired brake pedal height is achieved.

NOTE:
If the bleed procedure fails, do as following:
If a DTC is detected, select "Diagnostic Trouble Code" to clear DTCs. If the brake pedal eels spongy, repeat the conventional brake bleed procedure again.
11) When the desired brake pedal height is achieved, press the brake pedal to check the firmness.
12) Unplug the GM Tech2 scanner from the OBD socket
13) Install the 4 tires and wheel assemblies
14) Check the brake fluid level and the firmness of pedal again

How to use MB Star C3, C4, SD C4 to do online SCN coding

If it is possible to do program injectors and gear resetting with his MB SD C4 diagnostic tool for the following cars:

E 320 cdi year 2006 W211 224 Ps v6
C 220 cdi Year 1999 w202 125 Ps
C 220 cdi Year 1998 s202 125 Ps

The answer is yes, but it requires the MB Star tool to open SCN coding function. As you can see, there is a “tips” option in SD C4 software, which usually is not available. You can also find this function in MB Star C3 and MB Star C4 software interface. This is the SCN programming function. It can be used only after you purchase account and password for the function. Here are steps on buying and using this function.

How to get SCN coding function:

1. Purchase online SCN coding service.
2. Provide your order number of the SCN coding service to UOBD2.NET customer service to activate this function.

How to use SCN coding function:

1. Prepare MB Star SD C4, a laptop, Teamviewer and the cars that you are going to do coding or resetting.
2. Select car model and system that you want to program, such as headlight XALWA-L.
3. Select CONTROL unit adaptations.
 
4. Select offline program (CONTROL MODULE PROGRAMMING) then (SCN coding).
 
5. Run teamviewer and enter teamviewer id and password.
6. Login server (DALMLER)
7. Login server and finish SCN coding.
http://www.mbstartool.com

Super iCOM software for BMW ICOM/ICOM A2

Obd365 has newly launched the Super ICOM  ISPI NEXT 2014-12 Version software for BMW ICOM/ICOM A2 supporting update online and fitting laptops/pc in the market with SATS port. The Super ICOM is one of the best after-market tools for BMW diagnostic, coding, programming released by Super ICOM Industry Company.
The advanced V2014-12 Super ICOM ISPI NEXT enjoys following features:
1) Latest V2014.12 information:
ISTA-D: 3.46.20.1283
ISTA-P: 3.54.1.001
VIN: 2014.12
Software including:
Super iCOM Updater v1.0
Super iCOM SN Reader v1.0
Super iCOM Tray
iToolRadar
BMW VIN to HEX
VIN to HEX Decoder/Encoder
EWS Editor v3.2.0
Ncs Dummy 5.0.5
Ncs Dummy 6.0.1
INPA
NCS Expert Tool
WinKFP
E-Sys
Ediabas Configuration Tool
Ediabas Toolset 32
CCleaner
Teamviewer

2) Super iCOM software is 100% fully functions as the dealer workshop use, including BMW Group ISTA, BMW Group ISTA-P, BMW Group ISPI Local path, Super iCOM updater v1.0, Super iCOM SN Reader, iToolRadar, etc.
3) Super iCOM software platform use ISPI NEXT which is the latest platform developed by BMW AG.

4) Software support update online, one year for free. You can use update tool update software on www.supericom.com
5) Super ICOM software support multi-languages (with full repair article and Wiring diagram):
ISTA D: French, German, Greek, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Swedish, Thai and Turkish
ISTA-P: German, British English, Czech , Thai, Korean American English, Swedish ,Spanish ,Italian ,French ,Greek ,Japanese , ,Indonesian ,Chinese ,Taiwanese ,Turkish ,Dutch ,Portuguese, Russian, and Polish
5) Super ICOM software improves and develops many new features comparing previous ICOM software.
Upgrade the ISTA-D Software till the latest version 3.46.20.1283
Upgrade the ISTA-D Software till the latest version 3.54.1.001
Rebuild the ISTA-P Launcher to V3.0
Fix the bug of full screen when using ISTA-P
Fix the bug of full screen when using ISTA-D
Fix the ISTA-P Launcher quit error
Fix the dealer information is ISTA-P/ ISTA/D
Add full languages selection options internal ISTA-P
Add brands selection options internal ISTA-P
Add the ISTA-P Launcher start waiting screen
Add the ISTA-P Launcher close waiting screen
Add the Campagna Motors in ISTA-D
Add BMW / BMW Motorcycle / BMW i / BMW Mini / Rolls-Royce / BMW UX selection options internal ISTA-P
Optimize the ISTA-D / ISTA/P starting speed
Optimize the Windows 8.1 first time start configuration speed
Optimize the Windows 8.1 Touch screen / Tablet drivers
Optimize Expert Mode coding / programming speed

NOTE:
Software is preinstalled. Software comes with USB Key, no need active, one button click operation, very easy for use.