Good Price VXDAS VSP200 Power Scan Tool

The VXDAS VSP200 power scan kit is the most revolutionary circuit tester to date, featuring AVOmeter, test light, built -in flashlight, short circuit indicator, relay/component tester, continuity tester and bad groud indicator. An absolute easy-to-use tool must for every technician looking for a fast and accurate solution to electrical systems diagnostics.



€55.99 at OBDexpress.co.uk

Comparison between VSP200 and YD208:

When testing the diode, YD208 can only display the negative while VSP200 shows the values.
When testing AC, YD208 only displays a square wave (an analog signal) while VSP200 can show the real waveform.

Comparison between VSP200 and PS100:

PS100 test without the diode but only the sound
PS100 transforms sound waveform when testing the alternating current (AC) adapter, the sound varies as waveform changes, while VSP200 directly displays that.

VXDAS VSP200 Circuit Tester Features:
 
1. Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation.
2. Easy to read AV0 meter allows you to read voltage, current and resistance at the fingertip.
3. With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
4. Simultaneously uses the hot lead and the found lead to activate components right in your hand.
5. Instantly identifies positive, negative and open circuits.
6. Circuit breaker protected.
7. Built-in flashlight enables you to work in the dark.
8. Audio tone indicator allows for no-look menu scrolling once user are familiar with menu tone assignment.
9. 20ft(extendable)cable provides excellent accessibility to test along the vehicle.
10.Extremely easy to use and highly reliable.

http://www.obdexpress.co.uk/wholesale/vxdas-vsp200-power-scan-tool-electrical-system-circuit-tester.html

best price Brake Fluid 3451L Tester

Odb2express.co.uk rolled out Brake Fluid 3451L Tester for motor and cars for transferring pressure in hydraulic braking system to stop wheel rotation, whose quality, selection and use are of great importance for the driving safety. Here are the details of the special tester for Brake Fluid 3451L.

Top 4 Reasons to Buy 3415L Brake Fluid Tester:

1. Detect the performance of brake fluid quickly, and inspect the quality of fluid according to the water content, so as to timely replace the brake fluid. It applies to the test of DOT3, DOT4 and DOT5 brake fluid, with the testing results indicated on the LCD screen, and characterized by high visibility, convenience and accuracy.

2. the front end is designed with test probe, strong magnet pickup (magnetic suction rod) and LED lamp.Insert the test probe in the brake fluid cup for testing, press (S) lamp button to turn on the lamp, then the contact position between test probe and fluid can be clearly seen, thus ensuring the accuracy of testing result.3. magnetic design of probe helps to clean the iron dirt in the brake fluid, thus greatly increasing the purity of brake fluid, and ensuring the safety and reliability of braking functions. When you are worrying about the iron objects dropped in the crack, holes or fuel tank and cannot get them, then the magnetic suction rod can just fix your problem.
   4. characterized by its simplicity, convenience and fastness, which is also broadly applied in individual workshops, repair factories and 4S stores.

Specification of 3415L Brake Fluid Tester package:

    

Technical parameters：Type: 3451L
Designation: Tester for brake fluid
Net weight: 116g
Power supply: 3v
Range of testing fluid: DOT3  DOT4   DOT5
Lighting lamp: 5mm / 3mm
Attractive force: 1000g / 500g
Temperature: -30C+198C
Probe: 17mm*26mm / 8mm*17mm

Why to buy 3415L Brake Fluid Tester from obdexpress.co.uk?

1- LEAGALLY AUTHORIZED

The package here is marked with the company name and comes with certification. Thus, the quality is guaranteed.

  

2- BEST PRICE

Brake Fluid Tester 3415L: €27

http://www.obdexpress.co.uk/wholesale/special-tester-for-brake-fluid-lcd-screen.html

It is the best price, compared with other online vendors.

Enjoy.

Original:http://blog.obdexpress.co.uk/2016/09/30/brake-fluid-3451l-tester-cars/

HOW TO: Reset ELV counter, Steering lock RED warning

Here is the Personal experience for sharing....

1 year ago i received a RED warning on my dashboard after using my car for some days with a bad battery (ultra low voltage). The RED warning indicate that my ELV (Steering lock) was working bad, but my ELV was working well without problems.

 

So, what is going on? The CAS module has a counter, when this counter exceed the max, a RED warning light come up. When you use a bad battery (low voltage) the ELV works but indicate an error to the CAS module.

Then, my ELV works fine but i have a RED %(#))$ light every time on my dashboard, every day, every morning. Yesterday i found the solution and works fine on my car, a R56 non-s 2008.

Credits to: “korell” on e90post.com

(http://www.e90post.com/forums/showthread.php?t=483387&page=4)

“

How to clear yellow warning light

If you have completed this DIY and still get that pesky yellow warning light, I found a way to clear it (credits to Micha from the German e60-forum.de). Apparently the ELV has an internal counter that causes the yellow (and red?) warning light to display. This counter can be reset using EDIABAS ToolSet32. The count is stored in the CAS and needs to be cleared in CAS and ELV. Load CAS.prg in ToolSet32 and run the commands “steuern_elvcounter_cas_loeschen” and “steuern_elvcounter_elv_loeschen”.
This procedure may even unlock the locked steering column with red warning light, but I haven’t had the red light since I performed the DIY. I’m assuming this because after my steering column was locked and I had towed my car to an indy shop, the mechanic was able to unlock it by “resetting” something.

BTW, this counter reset worked for me, but as with any advice you find on the Internet, you do this at your own risk. Bonjour 

”
To reset the ELV you have to use the “EDIABAS ToolSet 32“, connected to the car via OBDII with the same k+dcan cable of INPA and NCS Expert.

Connect the cable to the OBDII Port, insert the key and press start button (don’t start the car, only ignition ON). Open the software EDIABAS ToolSet 32.

On the menu, select File -> “Load SGBD, Group File F3”

Look for “Cas.prg” on the file list.

Look on the Job list the name: “steuern_elvcounter_cas_loeschen” and “steuern_elvcounter_elv_loeschen”. Double click on each one, and wait for a window, it says “Job Done” on the bottom.

DONE!, no more RED Light Steering lock issue.

Note: only works if your ELV works fine, and you have this issue because you didn’t replace your battery on time and wait some months for it, like me =(.

Credits to Chile

http://www.obdexpress.co.uk/service/bmw-icom-software-hdd-ista-d-technical-support-19546.html

BMW E-Sys 3.28.1 Download Free & Install on Windows XP

Free download BMW E-Sys v3.28.1 Psdzdata Lite v3.61.1 on Mega: NO Pass

https://mega.nz/#F!tc00gSIb!QSJatG3d3e4JVaDMt2aIhw

E-Sys 3.28.1 is the newest version, but not tested by professionals yet. You may try on your own risk when using ver. 3.28.1.

Download E-sys software v3.23.4: 100% Tested & Working Perfectly

http://www.obdexpress.co.uk/wholesale/enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-for-bmw-f-series-2978.html

Coding no issues for BMW F series with an ENET cable

How to install E-Sys 3.28.1 Psdzdata 3.61.1 on Windows XP？

1     You must uninstall the existing E-SYS version before installing new E-SYS 3.28.1. After installing tested it with Launcher 2.7.0 and it works.

2     E-SYS Launcher Premium V2.7.0 Build 132(require NET Framework 4.5.2 or later)

3     E-SYS Launcher Premium V2.7.0info

Added cheat code selection

Change Code Default Values button name to DO NOT USE!!! (VERWENDEN SIE KEINE!!!)

How to install BMW E-sys 3.28？

Run E-Sys_Setup_3_26_1_b42487.exe

Select language, click “Next” then “I accept the agreement” then “Next”.

Click “Browse” to choose where to install E-Sys. The default location is C:\EC-Apps\ESG\E-Sys.

Set the data path for E-Sys, the default is C:\Data.

Click next until the installation begins.

Click “Finish” to complete the basic installation procedure for E-sys.

Then you need to make it work.

You will see two folders, one is a “Patch” the other is “Token Generator”.

The patch folder contains 2 files

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)

Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)

Use the Token Software, enter a username as you like and password.

How to install Psdzdata?

This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.

It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!

Extract Psdzdata using Winrar. Right click it and click “extract here”.

After that go to C:\Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.

What can you do with bmw esys enet for bmw coding?
Programming = Flashing a module, which means changing the actual software. Best done with a BMW ICOM emulator.

Coding = Reading and writing the memory which contains the configuration. Can be done with an ENET cable.

With bmw enet esys, you can hide modules or code a module

1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
3. Display engine output and torque meter ( purely fun, look engine output )
4. Cancel confirmation screen big screen boot delay
5. Open the voice recognition function
6. Three kind of bluetooth phone ringtones ( personality only )
7. Increasing the cic memory address to 50
8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
9. The digital speed display ( fun only )
10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
11. Indoor cycling memories of the last time the state when engine off
12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
13. Increasing shift paddles
14. The small screen to the large-screen display modify
15. Pdc display vertical and horizontal
16. Disable the seat belt status display – passenger seat
17. Disable the seat belt status display – driver seat
18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
19. Disable seat belt reminder – driving position
20. Disabled unfasten their seat belts voice prompts – passenger seat
21. Disabled unfasten their seat belts voice prompts – driving position
22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
23. Angel eyes open and cancel functions

24 turn off the engine start-stop function turned on by default

25, gps time synchronization

26. Foot open the back cover
27. Ds show s1-s7 selection
28. Active sports gearbox program sport +
29. Single microphone settings
30. Engine off automatically unlock
31. Internet applications
32. Armrest usb playback video
33. The maximum distance disable front camera view
34. The maximum distance to disable the rear camera view
35. Maximum speed disable front camera view
36. The maximum speed to disable the rear camera view

 Source:http://blog.obdexpress.co.uk/2017/04/12/e-sys-3-28-1-psdzdata-3-61-1-download-and-install/