v2.23 kess v2 fw 7.020 ECU programmer

Tuesday, 31 December 2013

Ways to Change Chevy Dash Lights


If the dash lights autel tool on your Chevy instrument panel come to be damaged you must look to replace them as soon as achievable. These lights offer you vital info when driving your car, and without the need of them you could place by yourself or others in danger. You are able to select up the resources and replacement LED dash lights you will need from your neighborhood car retailer.
Pop the hood of the Chevy. Locate the battery. Use a wrench to eliminate the bolts which resolve the cable clamps for the terminals. Get rid of the constructive and detrimental cables in the terminal.
Enter the drivers seat and reduced the steering wheel as far down as it will go inside the steering column. This can offer you quick entry to your instrument panel.
Use a phillips-head screwdriver MaxiCheck DPF to get rid of the two screws which resolve the rubber bezel in area throughout the instrument panel. Pull the bezel from around the panel and place in a safe place for reattachment later.
Remove the three mounting screws which attach the instrument panel towards the dashboard. Slide the panel out of the dash and unhook the electrical connector which is attached for the rear with the panel. Move the panel on to a flat work region.
Unscrew the damaged dash lights by turning them within a counterclockwise direction until they come loose. Exchange them by screwing the brand new LED bulbs in for the panel from the opposite direction. Maintain turning them until finally you are able to turn them no additional to make sure these are firmly in location.
Reattach the instrument panel and bezel in for the dashboard following the elimination measures in reverse. Place the optimistic and negative cables back on to your battery terminals and fix in place together with the clamps. Flip on the engine to verify that the dash lights now get the job done accurately.

No comments:

Post a Comment