v2.23 kess v2 fw 7.020 ECU programmer

Tuesday, 31 March 2015

Two SKP-900 Key Programmer Errors solution

Get newest V3.3 SKP-900 key programmer on OBDexpress.co.uk, while here I would like to conclude several errors that some customer confronted with when use SKP-900 device. All the error can be well solved according to our engineer suggestions .

Error:
Recently several customers reflected that they had suffered from problem (shown at picture below) when using SKP-900 key programmer.
SKP-900 Key Programmer Error
Analysis:
As for the error, Obd2express engineer expressed that the error might, to a great extent, be caused by update interruption.

Solution:
This error can be easily solved, only need to update again.

PDF file for SKP-900 key program update:
http://www.obdii65.com/upload/pro/201404/how-to-update-skp900-obd365.pdf

Error:
The screen appears the error reading "CAN BE USED 0 Time; ADD IT IN MAIN MENU; ADD TIMES FUNCTION” when use SKP-900 key programmer to work on car What could be the problem?
SKP-900 Key programmer error
Solution:
This error means that the tokens have been already used up, so it can be back to normal use by adding enough tokens The method of adding tokens is as follows.:
1. You need to go to the official website: http://www.superobd.com/ to register and login, then click the “download” menu, download and install the program named "SKP-900_Add_Free_Tokens".
SKP-900 key programmer
2. Connect SKP-900 to pc via USB cable, press "Add free tokens" button.
3. Open the activation software, then click "Scanning port" (Note: Every time you can add 100 TOKENS, you can add free tokens only your device has less than 10 tokens).
4. Then click "Activating" button to add free tokens.
SKP900 key programmer solution

Tuesday, 17 March 2015

Solution of MINI DSG Reader License File Error

"License File Error" when using MINI DSG Reader today. Please see the picture below. It was first time using this tool and followed video to install it. And also have disable the anti virus software on my tablet during DSG Reader installation. What could be wrong? And what should I do? Thank you.
MINI DSG Reader License File Error
According to technician, this was caused by old software. Please download the latest 2014.6 MINI DSG Reader in the following link: http://www.obdii365.com/upload/pro/201406/mini-dsgreader-2014.6.zip
After installing the latest software, your MINI DSG Reader will be activated and the issue should be fixed. If the problem still stays, please contact me again and we will arrange our technician to help you install it. OBDexpress.co.uk

Thursday, 12 March 2015

Steps to update V2014.11 BMW ICOM Firmware to V2014.12

If newest 2014.12 BMW ICOM software HDD fails to connect with your vehicle or fails to diagnose cars, you will need to run for firmware upgrade.
2014.12 BMW ICOM Software

How to update V2014.11 BMW ICOM Firmware?

1. Connect BMW ICOM A2 diagnostic unit with computer via network cable. Power up ICOM A2 with 12 V adaptor or connect it with vehicle via OBD diagnostic socket.
BMW ICOM A2 connection

2. Browse IE explorer to http://169.254.33.45:60080/, enter name: root and password: NZY1150263

3. Click "Update Firmware", ICOM firmware information will be displayed.

4. Select "ICOM-BootImage-01-13-00.bin" file, set image type to "SYSTEM". Click "Send the file"

5. When the system pops out the message "Write the image file to the flash?", click "Yes". The ICOM indicator light will turn red.

6. When the system prompts "The SYSTEM IMAGE update was successfully", click "Update Firmware" icon

7. Select "ICOM-ApplicationImage-01-18-00.bin" file, set image type to "APPLICATION", click"Send the file". The process will take a few minutes due to the file size, please wait patiently.

8. Click "Yes" when system pops out "Write the image file to the flash?" notice. ICOM A2 unit indicator light will turn red again.

9. When all settings are complete, click "reboot"

Free Download the BMW ICOM firmware update attachment:
https://mega.co.nz/#!T8B3xK7C!QeVVfQt3f8S9N03sHmWPyDtRnlFqn8DTBkQdv1c7148

NOTE:
1) Set the local connection IP to obtain an IP address automatically
2) There are 2 firmware update files, first install the small file and choose "SYSTEM" correspondingly. Then install larger file, select "APPLICATION" instead.
3) The firmware file and method fits for BMW ICOM A1, ICOMA2 and ICOM.
More BMW ICOM diagnostic tool click here.