Simple guide on how to use Quickly 4C 4D 46 48 clone machine
1.The external interface as show in following picture:
2.Identify the chip
Put the chip into the chip read area and click "chip reading and writing". If there is a
chip, the corresponding chip and parameter will be displayed, as show in following picture:
3.Copy the chip
For example: copy the chip 42. Firstly, put the key that can start the original car into the
chip reader area to read data, as show in following picture. Then decoder, remove the key of
original car, put into the new chip 42, click "copy", as show in next picture---OK!
4.Additional settings
For example: in order to generate the chip 4D67, we first put a blank chip 4D60 into the
chip reader area and then click "additional settings"--"key cutting", as show in Fig.(6)---
click 67, as show in Fig(7)---generate data---done, as show in Fig.(8)
5. Identify whether Toyota smart key has been used or not
For example: put Toyota smart key into the chip read area and click "additional settings"---
reading of "smart key", it will show you it is new or used.
6. Detect the frequency
Put the key of the remote controller into the frequency detection area in a flat manner, and
click "frequency detection" in the menu; then, press any key of the remote controller, and
corresponding frequency, ID, modulation mode, speed and other parameters are then show on
the screen.
Quickly 4C/4D/46/48 chip transponder
No comments:
Post a Comment