v2.23 kess v2 fw 7.020 ECU programmer

Wednesday, 31 August 2016

How to solve VAS 5054A VAS-PC V19 no communication with control unit

Symptom:
Have installed VAS-PC v19 software and driver to work with VAS5054A Bluetooth scanner, but it failed to communicate with the car

Error message in VAS-PC:
USB setup in Computer management: Usb serial port (com3)
5054a-vas-pc-no-communication (1)

Fallo en el bus de diagnostico:
La interfaz de diagnostico (VCI) no esta correctamente instalada
Por favor, cierre la aplicacion y configure la interfaz de diagnostico
(Failure diagnostic bus:
The diagnostic interface (VCI) is not properly installed
Please close the application and configure the diagnostic interface)
5054a-vas-pc-no-communication (2)

Fallo en el bus de diagnostico:
Numero de averia: 200.59
(Failure diagnostic bus:
Number of breakdown: 200.59)
5054a-vas-pc-no-communication (3

Nota:
No es posible establecer niguna communicacion con la unidad de control que hay montada
(Note:
It is not possible to establish any communication with the control unit that is mounted)
5054a-vas-pc-no-communication (4)



Professional suggestion:
VAS PC V19 should be installed in Ghost Windows XP Professional Sp3 operation system here:

Friday, 26 August 2016

How to use OBDSTAR X100 change KM on Mercedes-Benz ML S350

This is the DIY instruction on Mercedes-Benz ML S350 2011 year odometer correction by using OBDSTAR X100 Pro auto key programmer.

Here has three choice

SK164: X100 PRO C+D Type: Immobilizer + Odometer + OBD functiion
SK164-B: X-100 PRO C Type for IMMO + OBD Function
SK164-C: X100 PRO D Type for Odometer + OBD Function

BTW,OBDSTAR X300M can change Mercedes-Benz ML S350 2011 KM as well,The blue case X300 Pro key programmer is the domestic X100 Pro which adds some Chinese car models. They perform same functions. And OBDSTAR X-100 Pro have several configurations, if you need to adjust mileage,make sure you get the correct package.

Odometer correction procedure:
current mileage: 103744 km
 X-300-PRO-20111

connect obdstar x100 to the car
turn ignition on
make the x-100 pro start
select VEHICLES-> MILEAGE ADJUSTMENT-> BENZ-> BENZ V30.00

X-300-PRO-2011-2
X-300-PRO-2011-3

X-300-PRO-2011-3

X-300-PRO-2011-3

initializing…
authorizing…
select ML-> S164
X-300-PRO-2011-8

X-300-PRO-2011-9

input the mileage of the adjustment: 131030
X-300-PRO-2011-10

X-300-PRO-2011-11

communication…
calibration is successful
disconnect the insurance, on the insurance-after 5 s(seconds)!
X-300-PRO-2011-13

X-300-PRO-2011-14

X-300-PRO-2011-15

X-300-PRO-2011-16

now, the corrected mileage: 131008 km
X-300-PRO-2011-17

Done!
SOURCE:http://blog.obdexpress.co.uk/2016/08/26/obdstar-x100-change-km-on-mercedes-benz/

Tuesday, 9 August 2016

Special VAG CAN PRO CAN BUS+UDS+K-line S.W Version 5.5.1 VCP Scanner

This VAG CAN PRO support CAN BUS + UDS + K-Line for diagnostics and programming of electronic components used in vehicles Volkswagen, Audi, Seat, Skoda, made from 1990 to 2015.
New in version 5.5.1 VCP Scanner:
 VAG CAN PRO CAN BUS+UDS+K-line S.W Version 5.5.1 VCP Scanner

Support for new addresses entered in the MLB-Evo platform
Update database-ODX (support for all models 2015)
What features does VAG CAN PRO  have?
* Unique features OCLF service procedures (One-Click-Function);
* inexpensive flasher for VAG;
* inexpensive flasher with support UDS controllers;
* ESP MK60EC1 decision coding blocks;
* a tool for a complete diagnosis MQB platform (Golf VII, Octavia III) Support to 01.2013;
* ZDC-loading containers in the electronic components;
* Unlock video in motion (VIM) on the MQB platform (Discover Pro and MMI-MQB);
* Coding controllers for PR-codes;
* "Login finder" - allows you to scan and logins in the CAN controllers UDS;
* Support for the new Polo in 2014 Facelift;
* Support for the new Passat B8;
* Full support of Audi TT-3 on the platform of the IBC;
* Full support for Skoda Fabia III
This contributes to a more stable connection when connected directly to the ECU (Direct Connect), popular among fans VAG
 VAG CAN PRO CAN BUS+UDS+K-line S.W Version 5.5.1 VCP Scanner

VCP Scanner Supported cars:

1. Audi

A2 2009-
A3 8P 2003-
A3 - platform MQB-
A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-
A4 model 8K wariant B8 (UDS + TP2.0) 2008-
A5 model 8K (UDS) 2007-
A6 model 4F 2004-
A8 model 4E 2003-
Q3 (UDS) 2010-
Q5 (UDS) 2008-
Q7 (TP2.0 + UDS) 2006-
S5 model 8K
(R)S6 model 4F
R8 (UDS)
TT model 8J 2007-
2. Mercedes
Sprinter (VW Crafter) - - Only the engine and immobilizer
3. Seat
Altea
Leon MQB 2013-
Leon model 1P 2005-
Toledo model 5P 2004-
Exeo 2008- (Engine, transmission, airbags, ABS, park)
4. Skoda
octavia model 1Z 2004 -
octavia platform MQB -
superb II B6 2008-
fabia model 5J 2007-
yeti 2009-
5. Volkswagen
Crafter (immobilizer, engine)
Caddy model 2K 2005-
Eos
Golf V model 1K
Golf VI model 5K
Golf VII platform MQB
Golf Plus
Jetta II model 1K
Transporter / Multivan (Only after the CAN-BUS drive for storing data)
Multivan/Transporter GP model 7E (UDS) 2009-
Passat B6 model 3C 2005-
Passat CC-
Phaeton GP 2007-
Polo model 6R 2009-
Polo FL MQB 2014-
Scirocco III-
Touran-
Tiguan-
Touareg GP 2007-
Touareg NF 2010
Notes for Audi A4
1. Option A4 8E B6 model
This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.
2 .Model A4 8E, B7 option
This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so-called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.
In addition, a standard K-line. In other words, VCP fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.

Monday, 8 August 2016

How to use OBDSTAR X300 PRO to change mileage on Volvo S80

Here's a successful test of  mileage adjustment on Volvo s80 ’2008 
Starting.....
km before adjustment: 535220km

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

first, select the model: volvo s80 2008
check the connection of x300 pro3 and the car
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

select VEHICLES->MILEAGE ADJUSTMENT->OTHER MODELS->OTHER MODELS V30.51->VOLVO->S80->->07-
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk


then, change mileage
select Mileage adjustment
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

switch ignition on, then switch ignition off


obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

OBDSTAR X300 PRO3 is reading mileage...
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

input the name of file to save: 12300000
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

then the system displays the input value
X300 PRO3 reads the current mileage: 53520km, confirm to go on
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

input the new mileage: 73520
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

OBDSTAR X300 PRO3 is adjusting the mileage
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk

obdstar-x300-pro3-volvo-s80-obdexpress.co.uk


after operation success, then dashboard displays the new mileage also.
obdstar-x300-pro3-volvo-s80-obdexpress.co.uk
Done!