Automotive repair by car diagnostic tool and maintenance of general automotive coolant should be replaced every two years, the replacement of steps and precautions are as follows:
(A) release of coolant: First sump lid open (note at this time the radiator cap should be sealed tightly), unscrew the cylinder block and the radiator liquid discharge switch, the engine speed should be hot like circumstances.
(2) adding a new coolant.
Note:
1, to be exhausted after the coolant should tighten up the cylinder block and the radiator fluid switch.
2, from the provisions of the radiator filling liquid inlet coolant storage tank until the coolant fluid level reaches a predetermined "FULL".
3, at this time, car key programmer cover the radiator cap, let the engine run until normal operating temperature, stop stalling after cooling to room temperature.
4, and then observe the storage tank liquid level, as appropriate, add, until the engine idling, the liquid storage tank without air appear as well.
No comments:
Post a Comment